Roof Insulation and the Way to Increase

Roof insulation is really great for collecting warm air. There are many bad effects of heat which is rising. However, it can be beneficial with roof insulation options. That is set in the roof. You are able to use it in many things after the heat is collected. The insulation can be increased as well. Some advantages will be obtained then. One of the advantages is that your home will be more comfortable. That is since the heat has maintains and drafts a temperature which is stable in the room. If you are interested in that information, you had better follow this explanation to know how to increase the insulation set on the roof.

roof insulation diagram

Starting Stage to Increase Roof Insulation

First of all, you have to prepare some tools that are required to be used during the process of roof insulation. The roof insulation materials are including eye protection, work gloves, and also a mask to protect you from the dust. After using those things, you should set the insulation by means of paper backing by crossing the insulation which exists on the roof. You have to place it in the interior part. The depth of the insulation should be around six to ten inches. The old and new insulation are included here. However, both of them should be sufficient. Using a knife to cut the insulation is recommended. Do not forget to cut it to the correct size.

roof insulation

After doing all those procedures, you are able to do the next stage of the process by searching the gaps. The gaps should be found in the roof insulation. Canceled things lets heat air seep outside so that the cold air will soak inside. In filling whole gaps that you get, you have to use insulation.

Next Stage to Increase Roof Insulation

In the next step of roof insulation, applying caulking roughly whole fixtures of attic plumbing, the ceiling fixtures, ducts, roof, and also outlets of electricity is necessary to do. Then, you have to set the caulk between ceiling joints and the wall. The caulk will assist you preventing air leaks. After that, all holes and cracks in the attic should be sprayed with low expansion foam. The, the spaces will be filled with the foam.

If you have some troubles in doing the process, you are able to find other sources to guide you. That is the easiest way to do. The most important thing is that you have to use protections such as eye protection, a mask, gloves, and glasses when increasing the roof insulation.

Tags:

No comments yet.

Leave a Reply